Specification
|
|
Motion Detection 2.0 | |
Human/Vehicle Analysis | |
Deep learning-based motion detection 2.0 is enabled by default for all analog channels, | |
it can classify human and vehicle, and extremely reduce false alarms caused by objects | |
like leaves and lights; | |
Quick search by object or event type is supported; | |
|
|
Human/Vehicle Analysis Up to 4-ch | |
Facial Detection | |
Facial Detection and Capture Face picture detection, face picture search | |
Recording | |
Video Compression H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 | |
Encoding Resolution | |
When 1080p Lite mode is not enabled: | |
3K lite/5 MP lite/4 MP lite/1080p/720p/VGA/WD1/4CIF/CIF; | |
When 1080p Lite mode is enabled: | |
3K lite/5 MP lite/4 MP lite/1080p lite/720p lite/VGA/WD1/4CIF/CIF | |
Frame Rate | |
Main stream: | |
When 1080p Lite mode not enabled: | |
For 3K stream access: 3K lite@12fps;4 MP | |
lite/1080p@15fps;720p/WD1/4CIF/VGA/CIF@20fps | |
For 5 MP stream access: 5 MP lite@12fps;4 MP | |
lite/1080p@15fps;720p/WD1/4CIF/VGA/CIF@20fps | |
For 4 MP stream access: 4 MP lite/1080p@15fps;720p/WD1/4CIF/VGA/CIF@25fps | |
(P)/30fps (N) | |
For 1080p stream access: 1080p/720p@15fps; VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) | |
For 720p stream access: 720p/VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) | |
When 1080p Lite mode enabled: | |
3K lite/5 MP lite@12fps;4 MP lite@15fps;1080p lite/720p | |
lite/VGA/WD1/4CIF/CIF@25fps (P)/30fps (N) | |
Sub-stream: | |
WD1/4CIF@12fps; CIF@25fps (P)/30fps (N) | |
Video Bitrate 32 Kbps to 6 Mbps | |
Dual-stream Support | |
Stream Type Video, Video & Audio | |
Audio Compression G.711u | |
Audio Bitrate 64 Kbps | |
Video and Audio | |
IP Video Input | |
2-ch (up to 18-ch) | |
Up to 6 MP resolution | |
Enhanced IP mode on: | |
8-ch (up to 24-ch), each up to 4 Mbps | |
;Support H.265+/H.265/H.264+/H.264 IP cameras | |
Analog Video Input 16-ch;BNC interface (1.0 Vp-p, 75 Ω), supporting coaxitron connection | |
HDMI Output | |
1-ch, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1280 × | |
1024/60Hz, 1280 × 720/60Hz | |
VGA Output 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz | |
Video Output Mode HDMI/VGA simultaneous output | |
CVBS Input PAL/NTSC | |
CVBS Output | |
1-ch, BNC (1.0 Vp-p, 75 Ω), | |
resolution: PAL: 704 × 576, NTSC: 704 × 480 | |
Synchronous playback 16-ch | |
HDTVI Input | |
3K(2960 x 1665)@20 fps, 5 MP(2560 × 1944)@20 fps, 4 MP(2560 × 1440)@30 fps, 4 | |
MP(2560 × 1440)@25 fps,1080p@30 fps, 1080p@25 fps,720p@30 fps, 720p@25 fps | |
AHD Input | |
5 MP(2560 × 1944)@20 fps,4 MP(2560 × 1440)@30 fps, 4 MP(2560 × 1440)@25 fps, | |
1080p@30 fps, 1080p@25 fps, 720p@30 fps, 720p@25 fps | |
HDCVI Input | |
5 MP(2592 × 1944)@20 fps,4 MP(2560 × 1440)@30 fps, 4 MP(2560 × 1440)@25 fps, | |
1080p@30 fps, 1080p@25 fps, 720p@30 fps, 720p@25 fps | |
Audio Output 1-ch, RCA (Linear, 1 KΩ) | |
Audio Input 1-ch, RCA (2.0 Vp-p, 1 KΩ) | |
Two-Way Audio 1-ch, RCA (2.0 Vp-p, 1 KΩ) (using the first audio input) | |
Network | |
Total Bandwidth 128 Mbps | |
Network Protocol | |
TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS, | |
ONVIF | |
Remote Connection 128 | |
Network Interface | |
1,RJ45 10M/100M/1000M self-adaptive | |
Ethernet interface | |
Auxiliary Interface | |
SATA 2 SATA interface | |
Capacity Up to 10 TB capacity for each disk | |
Serial Interface RS-485 (half-duplex) | |
USB Interface | |
1 × USB 2.0; | |
1 × USB 3.0 | |
Alarm In/Out N/A | |
General | |
Power Supply 12 VDC | |
Consumption ≤ 40 W | |
Working Temperature -10 °C to +55 °C (+14 °F to +131 °F) | |
Working Humidity 10% to 90% | |
Dimension (W × D × H) 380 × 320 × 48 mm (15.0 × 12.6 × 1.9 inch) | |
Weight ≤ 2 kg (4.4 lb) | |
Note: |
|
1: Motion detection 2.0 and perimeter protection cannot be enabled at the same time. Enable one function will | |
make the other one unavailable. | |
2: Enhanced IP mode might be conflicted with smart events (motion detection 2.0 and perimeter protection) or | |
other functions, please refer to the user manual for details. | |
3: The number of audio inputs and alarm in/out can be optional. The tag on the package will describe audio input | |
and alarm in/out parameters. For example, “4A+8/4ALM” means your device has 4 audio inputs, 8 alarm inputs and | |
4 alarm outputs. If your device only has 1 audio input, the tag may not describe it. |
specification: නියමාවලිය, නිරූපිතය, පිරිවිතර, පිරිවිතර කිරීම, විශේෂ නියමය, විශේෂණය, වෛශේෂීකරණය, සම්පූර්ණ විස්තර විභාගය
English – Sinhala
(specify): නියම වශයෙන් සඳහන් කරනවා, විශේෂණය කිරීම
English – Sinhala
Reviews
There are no reviews yet.